TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE. (cont)
13-20.
Hydraulic Drive Protection Cover. (Sheet 3 of 3)
INSTALLATION
1.
Install right shield (6), two of four washers
(4) and two of four bolts (3, Figure 13-65).
Do not tighten bolts (3) at this time.
2.
Start engine. Refer to TM5-3805-261-10.
3.
Articulate vehicle full right.
4.
Stop engine.
5.
Install left shield (5), two of four washers (4)
and two of four bolts (3). Do not tighten
bolts (3) at this time.
6.
Install three washers (2) and bolts (1).
7.
Tighten four bolts (3).
NOTE
Return
130C
Grader
to
original
equipment condition.
Figure 13-65.
End of Task
13-78
