TM 5-3805-261-20
STEERING MAINTENANCE. (cont.)
11-7.
Steering Valve. (Sheet 2 of 6)
REMOVAL
NOTE
•
The following is a maintenance procedure
for the left steering valve. The maintenance
procedure for the right steering valve is
identical.
•
All hose and tube assemblies must be
tagged before disconnecting to aid in
installation. Cap all hose and tube ends
and plug all open hydraulic ports to prevent
contamination.
1.
Disconnect hose assembly (1, Figure 11-50)
from front valve port of left steering valve.
2.
Remove elbow (2) and preformed packing
(3). Discard preformed packing (3).
3.
Disconnect hose assembly (4, Figure 11-51)
from top valve port of left steering valve.
4.
Remove connector (5) and preformed
packing (6). Discard preformed packing
(6).
5.
Disconnect hose assembly (7, Figure 11-52)
from second valve port from top of left
steering valve.
6.
Remove connector (8) and preformed
packing (9). Discard preformed packing
(9).
Go to Sheet 3
Figure 11-50
Figure 11-51
Figure 11-52
11-36
