TM 5-3805-261-20
STEERING MAINTENANCE. (cont.)
11-6.
Supplemental Steering Check Valve. (Sheet 3 of 3)
INSPECTION
Inspect all parts. Refer to Chapter 2.
ASSEMBLY
Install check (17), spring (16), new seal (15),
adapter (14) and new seal (13) in body (18,
Figure 11-49).
INSTALLATION
1.
Holding body (18) connect hose assemblies
(12 and 11, Figure 11-48) so that adapter
end of valve faces forward on vehicle.
2.
Install plate (10), washer (9), bolt (8),
bracket (7), clip (6), washers (5 and 4) and
nut (3) so that clip (6) hooks over bracket
(7, Figure 11-47).
3.
Install three washers (2) and bolts (1, Figure
11-46).
4.
Inspect hose assemblies and connections
for leaks.
5.
Refill hydraulic tank to proper level. Refer to
LO 5-3805-261-12.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 11-49
Figure 11-47
Figure 11-46
End of Task
Figure 11-48
11-34