INSTALLATION (cont) - TM-5-3805-261-20

INSTALLATION (cont) - TM-5-3805-261-20_770

INSTALLATION (cont) - TM-5-3805-261-20_772

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
721

TM 5-3805-261-20 STEERING MAINTENANCE. 11-4. Steering Hoses, Lines and Fittings: Steering Control Pump to Steering Control Pump to Steering Valves. (Sheet 7 of 8) INSTALLATION 15. Install clamp (5), washer (4) and bolt (3, Figure 11-22) in left, front side. 16. Install clamp (13), two spacers (12), clamp (11), two washers (10) and bolts (9, Figure 11-24). 17. Install clip (16), washer (15) and bolt (14, Figure 11-25). 18. Install clamp (19), two washers (18) and nuts (17, Figure 11-26). 19. Install new strap (20, Figure 11-27) in steering console, inside of cab. WARNING Only a qualified operator may perform the next procedure. All other personnel must clear the immediate area. Failure to follow this procedure may cause INJURY. If you are injured, seek medical aid immediately. 20. Start engine. Refer to TM 5-3805-261-10. 21. Turn steering wheel to the right while moving the vehicle slowly forward a few feet. 22. Turn steering wheel to the left while moving the vehicle slowly forward a few feet. Figure 11-26 Figure 11-27 Go to Sheet 8 Figure 11-25 Figure 11-24 Figure 11-22 11-23

Privacy Statement
Press Release
Contact