TM 5-3805-261-20
STEERING MAINTENANCE. (cont)
11-4.
Steering Hoses, Lines and Fittings: Steering Control Pump to Steering Valves (Sheet 2 of 8)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Disconnect hose assembly (21, Figure 11-
21) from steering valve located in the left,
front side of front frame.
2.
Remove elbow (1) and preformed packing
(2). Discard preformed packing (2).
3.
Remove bolt (3), washer (4) and clamp (5,
Figure 11-22) from left, front side.
4.
Remove bolt (6), washer (7) and clamp (8,
Figure 11-23) from left, rear side.
5.
Remove two bolts (9), washers (10), clamp
(11), two spacers (12) and clamp (13,
Figure 11-24).
Go to Sheet 3
Figure 11-21
Figure 11-22
Figure 11-23
Figure 11-24
11-18