INSTALLATION - TM-5-3805-261-20

INSTALLATION (cont) - TM-5-3805-261-20_770

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
719

TM 5-3805-261-20 STEERING MAINTENANCE. 11-4. Steering Hoses, Lines and Fittings: Steering Control Pump to Steering Valves. (Sheet 5 of 8) REMOVAL 16. Remove two bolts (37), washers (38) and clamp (39, Figure 11-33). 17. Remove two bolts (40), washers (41), clamp (42), two spacers (43) and clamp (44), Figure 11-34). 18. Remove hose assembly (45). CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. INSTALLATION 1. Connect hose assembly (45, Figure 11-34) in vehicle. 2. Install new preformed packing (25) and elbow (24, Figure 11-29) in steering valve. 3. Install hose assembly (45). 4. Install clamp (44), two spacers (43), clamp (42), two washers (41) and bolts (40, Figure 11-34). 5. Install clamp (39), two washers (38) and bolts (37, Figure 11-33). 6. Install clamp (36), two spacers (35), clamp (34), two washers (33) and bolts (32, Figure 11-32). Figure 11-33 Figure 11-34 Go to Sheet 6 11-21

Privacy Statement
Press Release
Contact