TM 5-3805-261-20
TRANSMISSION MAINTENANCE. (cont)
8-6.
Transmission Control. (Sheet 6 of 7)
ADJUSTMENT (cont)
25.
Install new gasket (4), cover (3), three
washers (2) and bolts (1, Figure 8-18).
NOTE
The
following
procedure
is
for
adjustment
of
the
transmission
MODULATION control.
26.
Position
wood
block
between
pedal
assembly (19, Figure 8-25) and cab floor to
maintain pedal assembly (19) in raised
position. Horizontal
portion
of
pedal
assembly (19) must be parallel with cab
floor.
27.
Remove four bolts (20), washers (21),
cover (22) and gasket (23, Figures 8-26
and 8-27). Discard gasket (23). Remove
all gasket material from mounting surfaces.
Figure 8-25
Figure 8-27
Go to Sheet 7
Figure 8-18
Figure 8-26
8-28
