TM 5-3805-261-20
VEHICLE LIGHT SWITCH MAINTENANCE.
7-74.
Dimmer Switch. (Sheet 2 of 3)
REMOVAL
1.
Fold back corner of floor mat from inner, left
side of cab and remove two screws (1),
washers (2) and switch (5, Figure 7-101).
2.
Remove three screws (3) from switch (5,
Figure 7-102) under left side of floor in cab.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
3.
Disconnect three wire assemblies (4) from
switch (5).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-101
Figure 7-102
Go to Sheet 3
7-173
