TM 5-3805-261-20
VEHICLE LIGHT SWITCH MAINTENANCE.
7-73.
Vehicle Light Switch Assembly. (Sheet 2 of 2)
REMOVAL
1.
Remove six bolts (1), washers (2) and plate
(3, Figure 7-100).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect harness (4) from switch (7).
3.
Remove four screws (5), washers (6) and
switch (7).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install switch (7), four washers (6) and
screws (5, Figure 7-100).
2.
Connect harness (4) to switch (7).
3.
Install plate (3), six washers (2) and bolts
(1).
NOTE
Return 130G Grader to original
equipment condition.
Figure 7-100
End of Task
7-171
