TM 5-3805-261-20
VEHICLE LIGHT SWITCH MAINTENANCE. (cont)
7-76.
Magnetic Switch. (Sheet 2 of 3)
REMOVAL
1.
Remove six bolts (1), washers (2) and plate
(3, Figure 7-104).
2.
Remove four nuts (4) and washers (5) from
switch (12).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
3.
Disconnect three wire assemblies (6).
4.
Remove four nuts (7) and washers (8).
5.
Remove two bolts (9) and washers (10).
6
Remove strap (11) and switch (12).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-104
Go to Sheet 3
7-178
