TM 5-3805-261-20
FUSE BOX MAINTENANCE.
7-64.
NATO Slave Receptacle. (Sheet 3 of 4)
REMOVAL
9.
Remove two bolts (20), lockwashers (21)
and cable assemblies (22 and 23, Figure
7-92) in rear, left of engine compartment.
10.
Remove four bolts (24), lockwashers (25)
and receptacle (26).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install receptacle (26), four lockwashers
(25) and bolts (24, Figure 7-92).
2.
Install cable assemblies (23 and 22), two
lockwashers (21) and bolts (20).
3.
Install bracket (19), washer (18) and bolt
(17, Figure 7-91).
4.
Install clip (16), washer (15) and bolt (14)
on cable assemblies (23 and 22).
Figure 7-92
Go to Sheet 4
7-157
