TM 5-3805-261-20
FUSE BOX MAINTENANCE.
7-63.
Cab Fuse Box and Cover. (Sheet 2 of 3)
REMOVAL
1.
Remove two knobs (1), lock nuts (2) and
plate (3, Figure 7-86).
2.
Remove three 4 amp fuses (4), 20 amp
fuse (5), two 10 amp fuses (6), 5 amp fuse
(7) and 15 amp fuse (8, Figure 7-87).
3.
Remove screw (9, Figure 7-88).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
4.
Disconnect front fan wire assembly (10).
5.
Remove screw (11).
6.
Disconnect rear fan wire assembly (12).
7.
Remove eight screws (13).
8.
Disconnect cab main harness (14).
9.
Remove two screws (15) and fuse block
(16).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-86
Figure 7-87
Figure 7-88
Go to Sheet 3
7-153
