TM 5-3805-261-20
OPERATOR’S PANEL CONSOLE MAINTENANCE. (cont)
7-29.
Ether Control Switch. (Sheet 2 of 3)
REMOVAL
1.
Remove screw (1), lockwasher (2), and
knob (3, Figure 7-44).
2.
Remove lock nut (4), lockwasher (5) and
switch (6).
3.
Remove lock nut (7) from switch (6).
4.
Remove two screws (8) and lockwashers
(9).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
5.
Disconnect wire assemblies (10 and 11).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-44
Go to Sheet 3
7-82
