TM 5-3805-261-20
OPERATOR’S PANEL CONSOLE MAINTENANCE.
7-28.
Floodlight Switches. (Sheet 2 of 3)
REMOVAL
NOTE
The following is a maintenance
procedure for the rear floodlight
switch.
The
maintenance
procedure for the front floodlight
switch is identical.
All
wire,
cable
and
harness
assemblies
must
be
tagged
before disconnecting to aid in
installation.
1.
Remove lock nut (1), lockwasher (2) and
switch (3, Figure 7-43). Discard lock nut
(1).
2.
Disconnect two wire assemblies (4) from
terminals (7).
3.
Remove two screws (5), washers (6) and
terminals (7) from switch (3).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-43
Go to Sheet 3
5
7-79
