TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-22.
Hydraulic Pump Assembly, Junction Block and Steering Control Valve Lines. (Sheet 2 of 10)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Disconnect hose assembly (6, Figure 15-
67) from steering control valve.
2.
Remove
connector
(1)and
preformed
packing (2).Discard preformed packing (2).
3.
Remove four bolts (3) and washers (4).
4.
Remove two flange halves (5).
5.
Remove hose assembly (6).
6.
Remove and discard preformed packing (7)
from hydraulic pump assembly.
7.
Disconnect
hose
assembly
(10)
from
steering control valve.
8.
Remove elbow (8) and preformed packing
(9). Discard preformed packing (9).
Figure 15-67.
Go to Sheet 3
15-102
