TM 5-3805-261-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0013 00
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
i. Move machine and continue to
105
operate all controls through full
(Con't)
motion for 30 minutes AFTER
machine systems have reached
operating temperature.
j. Stop machine and allow to idle for
five minutes.
k. Shut down engine.
l. Perform After operation PMCS.
WARNING
106
Monthly
Service
Brake Test
Be ALERT for personnel in the area while operating machine.
Always check to ensure area is clear of personnel and obstruc-
tions before starting engine, moving machine, or lowering or
raising blade. Failure to follow this warning may cause injury
or death to personnel or damage to equipment.
Perform the following service brake
test:
a. Ensure area around machine is
clear of all personnel and obsta-
cles.
b. Test brakes on hard, packed dirt.
c. Fasten seat belt before testing
brakes.
d. Start and warm up engine (WP
e. Ensure air system is at operating
pressure of 11010 psi
(75869 kPa).
f. Raise blade and scarifier.
g. Operate machine in 3rd gear at full
throttle.
h. Apply service brake. If engine Wheels do not skid. Notify
stalls, service brakes are satisfac- Unit Maintenance.
tory.
0013 00-42