TM 5-3805-261-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0013 00
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
CAUTION
105
Monthly
All Systems -
Machine
DO NOT perform this PMCS exercise when temperature is
Exercise
below 0F (-18C).
NOTE
DO NOT exercise machine if it has been operated within the
past month.
a. Perform Before operation PMCS.
b. Start and warm up engine (WP
c. While machine is warming up, Class III oil or hydraulic leaks
perform a walkaround inspection, are evident. Any fuel or cool-
checking for evidence of leaks.
ant leaks are evident.
NOTE
If temperature is below 32F (0C), operate controls prior to
moving machine.
d. When machine has warmed up,
begin to operate ALL controls
slowly:
(1) Transmission in all ranges
including reverse
(2) Differential lock engaged and
disengaged
(3) Parking and service brakes
applied and released
(4) Steering from full left to full
right
(5) All hydraulic controls (blade,
scarifier, articulation and wheel
lean circuits)
(6) Centershift guide pin
g. Operate controls for another five
minutes.
h. Move machine and operate all
controls through full motion to
bring all systems to operating tem-
perature.
0013 00-41