TM 5-3805-261-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0013 00
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
ITEM
MAN-
SERVICE
PROCEDURE
CAPABLE IF:
NO.
INTERVAL
HOURS
a. While the engine is at low idle,
36
Before
Transmis-
check the transmission oil level.
sion/Differ-
Maintain level in the OPERATING
ential Oil
RANGE on the dipstick.
Level
b. If oil level is low, add oil (Item 10,
11, 12, or 14, WP 0022 00) through
filler opening. Reinstall fill cap. DO
NOT overfill.
Check accelerator pedal, decelerator
Pedal binds or does not oper-
37
During
Pedals
pedal, service brake pedal, and trans-
ate properly.
mission modulator pedal for binding
and obstructions.
Check service brakes for pulling, Brakes pull, grab, or do not
38
During
Brakes
grabbing, or reduced braking capacity. operate properly.
Check for smooth, controlled steering Steering is erratic.
39
During
Steering
without pulling or drifting.
Monitor grader operation for unusual
40
During
Drive Train
noise or vibrations from engine, trans-
mission, drive shafts, axles, and
wheels. Notify Unit Maintenance if
unusual noises are present.
Monitor blade and scarifier operations
41
During
Blade and
for unusual noise or vibrations.
Scarifier
Watch for evidence of fluid leakage.
Class III fuel, oil, or hydraulic
42
During
Overall
fluid leaks are evident. Any
Leakage
coolant leak is evident.
a. With machine fully warmed up, Gauges indicate an abnormal
43
During
Instrument
monitor EMS panel indicators and reading.
Panel
readings on gauges.
b. If an EMS panel indicator is flash- Engine oil pressure or air
ing, troubleshoot system (WP brake pressure EMS panel
00010 00).
indicator is flashing.
0013 00-14
