TM 5-3805-261-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0013 00
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
ITEM
MAN-
SERVICE
PROCEDURE
CAPABLE IF:
NO.
INTERVAL
HOURS
Check the blade slide bushings on Blade slide bushing
has
54
After
Blade Slide
both ends for excessive wear. The gap excessive wear.
Bushings
between the blade bracket and blade
should be greater than 1/8 in.
SHOULD BE
MORE THAN 1/8 IN.
GAP (3.2 MM)
397-1049
a. Check the blade for damage or dis- Damage or distortion.
55
After
Blade and
tortion.
Cutting
Edges
b. Check the cutting edges for dam- Damage or loose bolts.
age or loose bolts.
c. Check the cutting edges for exces- Cutting edge is worn to within
sive wear.
3/4 in. (19 mm) of blade.
d. Check sideshift cylinder for Class III leaks or damage that
debris, damage, or leaks. Remove would impair operation.
debris.
Ensure the blade work lights are
56
After
Blade Work
present and securely mounted.
Lights
Check left door for damage or missing Missing or damaged compo-
57
After
Left Door
(if Equipped) components.
nents if necessary for mission.
Left Mirror Check the left side mirror and step for Missing or damaged compo-
58
After
damage or missing components.
nents if necessary for mission.
and Step
(if Equipped)
0013 00-18
