TM 5-3805-261-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0013 00
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
a. Move the EMS Panel test switch to
22
Before
EMS Panel -
OFF and check for the following:
Test Switch
Off and
(1) Coolant temperature indicator Coolant temperature indica-
Engine Off
should be off.
tor is on.
(2) Engine oil pressure indicator Engine oil pressure indicator
should be on.
is off.
(3) Brake air pressure indicator Brake air pressure indicator is
should be on.
off.
(4) Hydraulic
oil
temperature Hydraulic oil
temperature
indicator should be off.
indicator is on.
(5) Alternator indicator should be on.
Alternator indicator is off.
(6) Steering indicator should be on.
Steering indicator is off.
(7) Master fault light should be off.
Master fault light is on.
(8) Fault alarm should be off.
Fault alarm is on.
a. Start the engine using the Start
23
Before
EMS Panel -
Test Switch
Off and
b. With the engine running, check for
Engine On
the following:
(1) All indicators should be off.
An indicator is on.
(2) Master fault light should be Master fault light is on.
off.
(3) Fault alarm should be off.
Fault alarm is on.
With the engine running and the EMS
24
Before
EMS Panel -
panel test switch on, check for the fol-
Test Switch
lowing:
On and
Engine On
(1) All indicators should be on.
An indicator is off.
(2) Master fault light should be on.
Master fault light is off.
(3) Fault alarm should be on.
Fault alarm is off.
WARNING
25
Before
EMS Panel -
Blade Float
Blade must be lowered before turning on the blade float
(if equipped)
switch. Failure to follow this warning may result in injury.
With engine running, move the Blade Blade float indicator is off.
Float switch to ON. Blade float indi-
cator should be on.
0013 00-11
