TM 5-3805-293-23-5
0345
CLEANING AND INSPECTION
Clean and inspect all electrical components IAW Electrical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
1. Install glow plug (Figure 6, Item 1) on arctic heater (Figure 6, Item 2).
Figure 6. Glow Plug.
0345
C AU T I O N
Do not over-tighten nut on glow plug. Failure to follow this caution may result in damage to
equipment.
2. Install rubber insulator (Figure 7, Item 4), wire connector (Figure 7, Item 1), and nut (Figure 7, Item 3) on glow
plug (Figure 7, Item 2).
