TM 5-3805-293-23-5
0340
REMOVAL
000340
N OT E
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
1. Remove clamp (Figure 1, Item 2) and coolant supply hose (Figure 1, Item 3) from brass fitting (Figure 1,
Item 1).
2. Remove clamp (Figure 1, Item 4) and hose (Figure 1, Item 3) from elbow (Figure 1, Item 5). Remove hose
(Figure 1, Item 3) from vehicle.
Figure 1. Arctic Heater Coolant Return Line.
0340
END OF TASK
CLEANING AND INSPECTION
000340
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000340
1. Install return hose (Figure 1, Item 3) and clamp (Figure 1, Item 4) on elbow (Figure 1, Item 5).
2. Install hose (Figure 1, Item 3) and clamp (Figure 1, Item 2) on brass fitting (Figure 1, Item 1).
END OF TASK