TM 5-3805-293-23-5
0317
CLEANING AND INSPECTION
000317
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
FILLING
000317
1. Clean and install drain plug (Figure 2, Item 2) on circle drive housing (Figure 2, Item 1).
2. Fill circle drive housing (Figure 2, Item 1) with gear oil (LO 5-3805-293-13).
3. Clean and install check/fill plug (Figure 2, Item 2) on circle drive housing (Figure 2, Item 1).
4. Start engine and operate machine (TM 5-3805-293-10).
5. Check circle drive housing (Figure 2, Item 1) for leaks.
6. Stop engine and remove check/fill plug (Figure 1, Item 1) and check oil level. Maintain oil level to bottom of
filler opening.
7. Install check/fill plug (Figure 1, Item 1) on circle drive housing (Figure 1, Item 2).
END OF TASK
END OF WORK PACKAGE
0317-3/(4 blank)
