TM 5-3805-293-23-5
0302
INSTALLATION CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
C AU T I O N
All surrounding surfaces on the drawbar must be clean before installing circle drive and
sprocket. Failure to follow this caution may cause damage to duo-cone seals and leak.
N OT E
Circle drive weighs 340 lb (154 kg).
Sprocket must be in place before lowering circle drive on machine.
Align splines on sprocket and circle drive shaft to aid in installation.
22. Attach slings and lifting device to circle drive (Figure 36, Item 1).
23. Using lifting device, install thrust washer (Figure 36, Item 2), sprocket (Figure 36, Item 3), and circle drive
(Figure 36, Item 1) on machine.
24. Remove slings, lifting device, three bolts (Figure 36, Item 4), and lifting brackets (Figure 36, Item 5) from circle
drive (Figure 36, Item 1).
Figure 36. Circle Drive, Sprocket, and Thrust Washer.
0302
