TM 5-3805-293-23-4
0271
INSPECTION
000271
1. Inspect connector pins (Figure 5, Item 4) for damage.
2. Inspect sensor electrical connector (Figure 5, Item 3) for damage.
3. Inspect sensor insulation and wires (Figure 5, Item 2) for damage.
4. Inspect sensor housing (Figure 5, Item 1) for damage.
5. Inspect sensor gear (Figure 5, Item 5) for damage.
Figure 5. Sensor.
0271
END OF TASK
INSTALLATION
000271
N OT E
Install sensor as noted during removal.
1. Install two new gaskets (Figure 4, Item 5), spacer (Figure 4, Item 4) AWD control dial position sensor (Figure 4,
Item 1), two washers (Figure 4, Item 3), and screws (Figure 4, Item 2) on AWD control dial (Figure 4, Item 6).