TM 5-3805-293-23-4
0261
ASSEMBLY
000261
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may cause injury to personnel.
1. Install hose (Figure 8, Item 6) and clamp (Figure 8, Item 5) on washer bottle (Figure 8, Item 1) and tighten
clamp (Figure 8, Item 5).
2. Install grommet (Figure 8, Item 3) and fitting (Figure 8, Item 2) on washer bottle (Figure 8, Item 1).
3. Apply sealant and install four plugs (Figure 8, Item 4) on washer bottle (Figure 8, Item 1).
4. Apply sealant and install three pumps (Figure 8, Item 9), washer lines (Figure 8, Item 8), and connectors
(Figure 8, Item 7) on washer bottle (Figure 8, Item 1).
Figure 8. Washer Bottle.
0261
END OF TASK