TM 5-3805-293-23-4
0260
INSTALLATION
000260
1. Install motor (Figure 5, Item 1) on machine.
N OT E
Install electrical connector as tagged during removal.
2. Connect electrical connector (Figure 5, Item 3) and place headliner (Figure 5, Item 2) into position.
3. Install panel (Figure 4, Item 1), two washers (Figure 4, Item 3), and screws (Figure 4, Item 2) on machine.
4. Install cover (Figure 6, Item 3), four washers (Figure 6, Item 2), and screws (Figure 6, Item 1) on machine.
Figure 6. Cover.
0260
5. Install two nuts (Figure 7, Item 1) and washers (Figure 7, Item 2) on shaft (Figure 7, Item 3). Torque nuts to 28
lb-ft (38 Nm).
Figure 7. Linkage Nuts.
0260