TM 5-3805-293-23-4
0249
REMOVAL
000249
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury to personnel.
N OT E
Tag connectors to aid in installation.
1. Remove two tiedown straps (Figure 1, Item 4) from AWD clutch pressure sensors (Figure 1, Items 5 and 11).
Discard tiedown straps.
2. Disconnect two electrical connectors (Figure 1, Items 3 and 6) from AWD wiring harness (Figure 1, Item 2).
3. Remove two dust caps (Figure 1, Item 1), couplings (Figure 1, Item 7) and O-rings (Figure 1, Item 8) from AWD
control manifold (Figure 1, Item 10). Discard O-rings.
4. Remove right AWD clutch pressure sensor (Figure 1, Item 11) and O-ring (Figure 1, Item 12) from AWD control
manifold (Figure 1, Item 10). Discard O-ring.
5. Remove left AWD clutch pressure sensor (Figure 1, Item 5) and O-ring (Figure 1, Item 9) from AWD control
manifold (Figure 1, Item 10). Discard O-ring.
Figure 1. Pressure Sensor.
0249
END OF TASK
CLEANING
000249
Clean all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK