TM 5-3805-293-23-4
0219
INSTALLATION CONTINUED
41. Position aftercooler tube (Figure 36, Item 10) on machine. Connect aftercooler tube and install clamp
(Figure 36, Item 9) on air intake (Figure 36, Item 8).
42. Install clamp (Figure 36, Item 1), nut (Figure 36, Item 4), two washers (Figure 36, Item 2), and bolt (Figure 36,
Item 3) on aftercooler tube (Figure 36, Item 10).
43. Connect air inlet temperature sensor pigtail (Figure 36, Item 7) to harness (Figure 36, Item 6).
44. Install pigtail (Figure 36, Item 7) on clip (Figure 36, Item 5).
Figure 36. Aftercooler Tube.
0219