TM 5-3805-293-23-4
0219
REMOVAL CONTINUED
000219
5. Remove bolt (Figure 4, Item 3), washer (Figure 4, Item 4), and spacer (Figure 4, Item 2) from aftercooler tube
(Figure 4, Item 1).
Figure 4. Aftercooler Tube Retainer.
0219
6. Remove pigtail (Figure 5, Item 7) from clip (Figure 5, Item 5).
7. Disconnect air inlet temperature sensor pigtail (Figure 5, Item 7) from harness (Figure 5, Item 6).
8. Remove bolt (Figure 5, Item 3), two washers (Figure 5, Item 2), nut (Figure 5, Item 4), and clamp (Figure 5,
Item 1) from aftercooler tube (Figure 5, Item 10).
9. Loosen clamp (Figure 5, Item 9) and disconnect tube (Figure 5, Item 10) from air intake (Figure 5, Item 8).
Position aftercooler tube aside.
Figure 5. Aftercooler Tube.
0219