TM 5-3805-293-23-4
0212
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag and mark lines to aid in installation.
22. Disconnect hose (Figure 11, Item 8) and remove O-ring (Figure 11, Item 7) from tube (Figure 11, Item 6).
Discard O-ring.
23. Remove hose (Figure 11, Item 8) from machine.
24. Disconnect hose (Figure 11, Item 9) and remove O-ring (Figure 11, Item 10) from tube (Figure 11, Item 11).
Discard O-ring.
25. Remove hose (Figure 11, Item 9) from machine.
26. Remove eight bolts (Figure 11, Item 2), washers (Figure 11, Item 3), and four clamps (Figure 11, Item 1) from
two tubes (Figure 11, Items 6 and 11).
27. Disconnect two tubes (Figure 11, Items 6 and 11) and remove two O-rings (Figure 11, Item 4) from pump
(Figure 11, Item 5). Discard O-rings.
Figure 11. AWD Pump Right-Side Hose-to-Tube Connections.
0212