TM 5-3805-293-23-4
0206
N OT E
The procedure for middle flood lamp replacement is identical for left and right middle flood
lamps. Left middle flood lamp is shown in these procedures.
REMOVAL
000206
1. Disconnect harness connector (Figure 1, Item 17) from middle flood lamp (Figure 1, Item 1).
2. Remove bolt (Figure 1, Item 2), two washers (Figure 1, Item 3), locknut (Figure 1, Item 7) and flood lamp
(Figure 1, Item 1) from mount (Figure 1, Item 6). Discard locknut.
3. Remove locknut (Figure 1, Item 4), washer (Figure 1, Item 5), and mount (Figure 1, Item 6) from bracket
(Figure 1, Item 9). Discard locknut.
4. Remove bolt (Figure 1, Item 14), two washers (Figure 1, Item 16), locknut (Figure 1, Item 8), and clamp
(Figure 1, Item 15) from bracket (Figure 1, Item 9). Discard locknut.
5. Remove two bolts (Figure 1, Item 12), washers (Figure 1, Item 11), wire loom retainer (Figure 1, Item 13), and
bracket (Figure 1, Item 9) from cab (Figure 1, Item 10).
Figure 1. Middle Flood Lamp.
0206
END OF TASK