TM 5-3805-293-23-4
0202
REMOVAL CONTINUED
16. Remove bolt (Figure 17, Item 7), washer (Figure 17, Item 10), and clamp (Figure 17, Item 9) from frame.
17. Remove bolt (Figure 17, Item 3), washer (Figure 17, Item 2), clamp (Figure 17, Item 1), and clip (Figure 17,
Item 6) from frame.
18. Disconnect drive solenoid clutch harness connector (Figure 17, Item 4) from right motor speed harness con-
nector (Figure 17, Item 5).
19. Remove clip (Figure 17, Item 6) from right motor speed sensor harness connector (Figure 17, Item 5).
N OT E
Attach string or wire to end of harness prior to removal.
20. Pull speed sensor harness (Figure 17, Item 11) through sleeve (Figure 17, Item 8) to remove from machine.
Figure 17. Hose Bundle.
0202
END OF TASK
CLEANING AND INSPECTION
000202
1. Clean and inspect all mechanical components IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical components IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK
Change 1