TM 5-3805-293-23-4
0197
DISASSEMBLY CONTINUED
2. Remove lens (Figure 3, Item 8) and signal bulb assembly (Figure 3, Item 1) from housing (Figure 3, Item 3).
3. Disconnect two connectors (Figure 3, Item 2) from signal bulb assembly (Figure 3, Item 1).
4. Disconnect two connectors (Figure 3, Item 4) from bulb (Figure 3, Item 10).
5. Remove bulb (Figure 3, Item 10) from lens (Figure 3, Item 8).
6. Disconnect bulb connector (Figure 3, Item 5) from bulb (Figure 3, Item 7).
7. Remove gasket (Figure 3, Item 9) from lens (Figure 3, Item 8). Discard gasket.
8. Remove retainer clip (Figure 3, Item 6) and bulb (Figure 3, Item 7) from lens (Figure 3, Item 8).
Figure 3. Bulb.
0197
END OF TASK
CLEANING AND INSPECTION
000197
1. Clean and inspect all mechanical components IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical components IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK