TM 5-3805-293-23-4
0188
REMOVAL CONTINUED
29. Disconnect rear chassis wiring harness (Figure 11, Item 7) from intake air temperature sensor connector
(Figure 11, Item 2).
30. Remove bolt (Figure 11, Item 3), washer (Figure 11, Item 4), clamp (Figure 11, Item 5), and spacer (Figure 11,
Item 6) from fuel rail (Figure 11, Item 1) and rear chassis wiring harness (Figure 11, Item 7).
31. Loosen bolt (Figure 11, Item 11) and disconnect rear chassis wiring harness connector (Figure 11, Item 9) from
engine ECM (Figure 11, Item 8).
32. Remove bolt (Figure 11, Item 12), washer (Figure 11, Item 13), three clips (Figure 11, Item 15), and spacer
(Figure 11, Item 14) from transmission cooler bracket (Figure 11, Item 18).
33. Disconnect rear chassis wiring harness (Figure 11, Item 7) from charge pressure harness connector
(Figure 11, Item 17) and remove from clip (Figure 11, Item 15).
34. Disconnect rear chassis wiring harness (Figure 11, Item 7) from starter relay harness connector (Figure 11,
Item 16) and remove from clip (Figure 11, Item 15).
35. Remove tiedown straps (Figure 11, Item 10) from rear chassis wiring harness (Figure 11, Item 7). Discard
tiedown straps.
Figure 11. Engine ECM Connection.
0188
Change 1