TM 5-3805-293-23-4
0183
WIRING HARNESS REMOVAL
000183
N OT E
Note location of tiedown straps prior to removal to aid in installation.
Note routing of wiring harness prior to removal.
Assistance will be requiredduring this procedure.
If performing this task on machine with serialnumber prefix CBS, perform steps 1 through
3. If performing this task on machine with serial number prefix RMY, perform steps 4
through 6.
1. Disconnect front worklight wiring harness (Figure 1, Item 2) from front flood lamp assemblies (Figure 1, Item 1).
2. Remove 5 bolts (Figure 1, Item 6), washers (Figure 1, Item 5), and 10 clamps (Figure 1, Item 3) from front
frame (Figure 1, Item 7).
3. Remove tiedown straps (Figure 1, Item 4) from worklight wiring harness (Figure 1, Item 2). Discard tiedown
straps.
Figure 1. Front Flood Lamp Connections (Serial Number Prefix CBS).
0183
Change 1