TM 5-3805-293-23-4
0177
BACKUP LAMP REMOVAL CONTINUED
3. Remove bulb (Figure 7, Item 2) from backup lamp (Figure 7, Item 1).
4. Disconnect rear harness (Figure 7, Item 10) from backup lamp connector (Figure 7, Item 9).
5. Remove tiedown strap (Figure 7, Item 6) from clip (Figure 7, Item 3) and rear harness (Figure 7, Item 10).
Discard tiedown straps.
6. Remove two nuts (Figure 7, Item 5), washers (Figure 7, Item 4) and clips (Figure 7, Item 3) from backup lamp
(Figure 7, Item 1).
7. Remove nut (Figure 7, Item 8), washer (Figure 7, Item 7) and backup lamp (Figure 7, Item 1) from engine
enclosure (Figure 7, Item 11).
Figure 7. Backup Lamp.
0177
END OF TASK
CLEANING AND INSPECTION
000177
1. Clean and inspect all mechanical components IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical components IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK