TM 5-3805-293-23-4
0173
CLEANING AND INSPECTION
000173
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000173
N OT E
Install hoses as tagged during removal.
Route hoses as noted during removal.
1. Install fuel supply line (Figure 12, Item 2) on machine.
2. Install new O-ring (Figure 12, Item 3) and connect fuel supply line (Figure 12, Item 2) to fuel tank (Figure 12,
Item 1).
3. Install clip (Figure 11, Item 13), washer (Figure 11, Item 11), and bolt (Figure 11, Item 12) on bracket
(Figure 11, Item 6).
4. Install two clips (Figure 11, Item 3), bolt (Figure 11, Item 2), washer (Figure 11, Item 4), and nut (Figure 11,
Item 5), on hoses (Figure 11, Items 1 and 7).
5. Install crossover hose (Figure 11, Item 10) on fuel tank (Figure 11, Item 8) and tighten two clamps (Figure 11,
Item 9).
6. Install two spacers (Figure 13, Item 3), guard (Figure 13, Item 4), two washers (Figure 13, Item 2) and bolts
(Figure 13, Item 1) on machine.
7. Install four washers (Figure 13, Item 6) and bolts (Figure 13, Item 5) on guard (Figure 13, Item 4).
Figure 13. Crossover Tube Guard.
0173