TM 5-3805-293-23-3
0167
REMOVAL CONTINUED
000167
50. Remove two wiring harnesses (Figure 15, Item 3) from hose bundles (Figure 15, Item 2).
51. Remove two abrasion sleeves (Figure 15, Item 1) from hose bundles (Figure 15, Item 2).
Figure 15. Wiring Harnesses.
0167
END OF TASK
CLEANING AND INSPECTION
000167
1. Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical parts IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK
INSTALLATION
000167
N OT E
Install all lines as marked and tagged during removal.
Position hoses on machine with hoses positioned at distances noted from center block
during removal.
1. Install two abrasion sleeves (Figure 15, Item 1) on hose bundles (Figure 15, Item 2).
2. Install two wiring harnesses (Figure 15, Item 3) on hose bundles (Figure 15, Item 2).