TM 5-3805-293-23-3
0163
ASSEMBLY
000163
N OT E
Refer to removal procedure for the recorded threads on tie rod end.
1. Install two tie rod ends (Figure 2, Item 5) on tie rod (Figure 2, Item 3).
2. Install two bolts (Figure 2, Item 1) and nuts (Figure 2, Item 4) on clamps (Figure 2, Item 2).
END OF TASK
INSTALLATION
000163
1. Install rod on machine.
2. Install two tie rod ends (Figure 3, Item 1) and nuts (Figure 3, Item 3) on spindles (Figure 3, Item 2). Torque nuts
to 103 lb-ft (140 Nm). Tighten nut as needed to install two new cotter pins (Figure 3, Item 4).
Figure 3. Tie Rod.
0163
END OF TASK
FOLLOW-ON TASKS
000163
Adjust axle toe-in (WP 0044).
END OF TASK
END OF WORK PACKAGE