TM 5-3805-293-23-3
0162
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Wheel lean bar weighs 110 lb (50 kg).
9. Using lifting device, remove wheel lean bar (Figure 6, Item 1) from machine and lower onto a flat surface.
Figure 6. Wheel Lean Bar.
0162
10. Remove lifting device and sling from wheel lean bar.
END OF TASK
CLEANING AND INSPECTION
000162
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
