TM 5-3805-293-23-3
0152
REMOVAL
000152
Left Rear Lower Enclosure Panel
000152
1. Remove cotter pin (Figure 1, Item 2), washer (Figure 1, Item 3), and rod (Figure 1, Item 1) from panel
(Figure 1, Item 4). Discard cotter pin.
2. Remove four bolts (Figure 1, Item 6), washers (Figure 1, Item 5), and panel (Figure 1, Item 4) from machine.
Figure 1. Enclosure Panel.
0152
END OF TASK
Transmission Pump Pressure Sensor
000152
1. Disconnect transmission pump pressure sensor connector (Figure 2, Item 7) from wiring harness (Figure 2,
Item 6) and remove two tiedown straps (Figure 2, Items 1 and 2). Discard tiedown straps.
2. Remove transmission pump pressure sensor (Figure 2, Item 3) and O-ring (Figure 2, Item 4) from adapter
(Figure 2, Item 5). Discard O-ring.
Figure 2. Transmission Pump Pressure Sensor.
0152
END OF TASK