TM 5-3805-293-23-3
0142
PREPARATION FOR INSTALLATION CONTINUED
16. Disconnect wire harness connector (Figure 48, Item 15) from transmission (Figure 48, Item 1).
17. Install new O-ring (Figure 48, Item 6) and elbow (Figure 48, Item 5) on transmission (Figure 48, Item 1).
18. Install new O-ring (Figure 48, Item 9) and fitting (Figure 48, Item 10) on transmission (Figure 48, Item 1).
19. Install new O-ring (Figure 48, Item 16) and fitting (Figure 48, Item 17) on transmission (Figure 48, Item 1).
20. Install O-ring (Figure 48, Item 7) and fitting (Figure 48, Item 8) on transmission (Figure 48, Item 1).
21. Connect wire harness connector (Figure 48, Item 15) to transmission (Figure 48, Item 1).
22. Install two new O-rings (Figure 48, Items 3 and 14), tube (Figure 48, Item 2), two clamps (Figure 48, Item 13),
four washers (Figure 48, Item 12), and bolts (Figure 48, Item 11) on transmission (Figure 48, Item 1).
23. Connect tube (Figure 48, Item 2) to hose (Figure 48, Item 4).
Figure 48. Transmission Fittings.
0142
