TM 5-3805-293-23-3
0141
INSTALLATION CONTINUED
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may cause injury to personnel.
3. Apply sealing compound to 16 bolts.
4. Install eight washers (Figure 10, Item 1), and bolts (Figure 10, Item 2) on rear axle. Do not tighten bolts.
N OT E
Install spacers as noted at removal.
5. Install four spacers (Figure 10, Item 3), eight washers (Figure 10, Item 4), and bolts (Figure 10, Item 5). Do not
tighten bolts.
Figure 10. Front Axle Bolts.
0141