TM 5-3805-293-23-3
0134
INSTALLATION CONTINUED
Transmission Oil Cooler
000134
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury.
9. Install two new O-rings (Figure 17, Item 6) and connect two pipes (Figure 17, Items 3 and 7) on transmission
oil cooler core (Figure 17, Item 1).
10. Install clamps (Figure 17, Item 2), eight washers (Figure 17, Item 5), and bolts (Figure 17, Item 4) on
transmission oil cooler core (Figure 17, Item 1).
11. Install spacer (Figure 17, Item 9), two clamps (Figure 17, Item 8), washer (Figure 17, Item 10) and bolt
(Figure 17, Item 11) on engine enclosure.
Figure 17. Transmission Oil Cooler Core Tubes.
0134