TM 5-3805-293-23-3
0134
REMOVAL CONTINUED
Transmission Oil Cooler
000134
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury.
3. Remove bolt (Figure 3, Item 11), washer (Figure 3, Item 10), two clamps (Figure 3, Item 8) and spacer
(Figure 3, Item 9) from engine enclosure.
4. Remove eight bolts (Figure 3, Item 4), washers (Figure 3, Item 5), and clamps (Figure 3, Item 2) from
transmission oil cooler core (Figure 3, Item 1).
5. Disconnect two pipes (Figure 3, Items 3 and 7) from transmission oil cooler core (Figure 3, Item 1) and remove
two O-rings (Figure 3, Item 6). Discard O-rings.
Figure 3. Transmission Oil Cooler Core Tubes.
0134
