TM 5-3805-293-23-3
0127
REMOVAL
000127
1. Remove oil level gauge (Figure 1, Item 1) from upper filler tube (Figure 1, Item 4).
2. Remove breather (Figure 1, Item 2) and elbow (Figure 1, Item 3) from upper filler tube (Figure 1, Item 4).
3. Remove two bolts (Figure 1, Item 5), washers (Figure 1, Item 6), upper filler tube (Figure 1, Item 4), gasket
(Figure 1, Item 7), baffle (Figure 1, Item 8), and gasket (Figure 1, Item 9), from lower tube (Figure 1, Item 11).
Discard gaskets.
4. Remove lower filler tube (Figure 1, Item 11) and gasket (Figure 1, Item 10) from rear axle (Figure 1, Item 12).
Figure 1. Powertrain Oil Filler.
0127
END OF TASK
CLEANING AND INSPECTION
000127
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK