TM 5-3805-293-23-3
0116
INSTALLATION CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
6. Install two new O-rings (Figure 20, Item 5), connect two tubes (Figure 20, Item 4), and install four clamps
(Figure 20, Item 6), eight washers (Figure 20, Item 2) and bolts (Figure 20, Item 3) on AWD pump (Figure 20,
Item 1).
Figure 20. Rear Charge Pump AWD Tubes.
0116