TM 5-3805-293-23-3
0100
INSTALLATION CONTINUED
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may cause injury to personnel.
12. Apply sealing compound to remaining two bolts and install bolts (Figure 14, Item 3) and washers (Figure 14,
Item 2) on flywheel (Figure 14, Item 1).
13. Tighten 12 bolts (Figure 14, Item 3) to 100 15 lb-ft (135 20 Nm).
N OT E
Prior to installing torsional coupler on flywheel perform the following tests: Alignment of
Flywheel, Flywheel Runout, Flywheel Housing Inspect Concentricity of Flywheel
Housing, and Alignment of Flywheel Housing (WP 0032).
Figure 14. Flywheel.
0100
