TM 5-3805-293-23-3
0100
REMOVAL CONTINUED
WARN I N G
Idler gear will fall when gear retainer is removed. Failure to follow this warning may result
in injury to personnel.
N OT E
The procedure for implement/steering pump gear removal and replacement and the all-
wheel drive pump gear removal and replacement is the same. The implement/steering
pump gear is shown in this procedure.
12. Remove three bolts (Figure 7, Item 9), gear retainer (Figure 7, Item 8) and idler gear (Figure 7, Item 7) from fly-
wheel housing (Figure 7, Item 6).
13. Remove six bolts (Figure 7, Item 1), washers (Figure 7, Item 2), and adapter (Figure 7, Item 3) from flywheel
housing (Figure 7, Item 6).
14. Remove and discard O-ring (Figure 7, Item 4) from flywheel housing (Figure 7, Item 6).
15. Remove drive gear (Figure 7, Item 5) from flywheel housing (Figure 7, Item 6).
Figure 7. Gears.
0100
END OF TASK
